Premium Stockist & Exporter of Carbon Steel Pipe Fittings & Flanges – ASTM A234 WPB/WPC, A860 WPHY 42 to 70, A105, A350 LF2, A694 F42 to F70 – Forged SW/Threaded Fittings & WNRF/SORF/BLRF Flanges – ASME B16.5, B16.9, B16.11 – Class 150 to 2500, SCH 10 to XXS – Global Delivery.
Carbon Steel Pipe Fittings and Flanges are widely used in critical piping applications across oil & gas, petrochemical, power generation, and shipbuilding industries. These materials offer excellent mechanical properties, weldability, and cost efficiency. Among the most common grades are ASTM A234 WPB/WPC, which are used for standard pressure piping systems and are available in seamless and welded buttweld fittings such as elbows, tees, reducers, and end caps. These fittings conform to ASME B16.9 and are offered in a wide size range from ½” to 48” NB, with wall thicknesses from SCH 10 to SCH XXS.
High-strength carbon steel grades like ASTM A860 WPHY 42, 46, 52, 60, 65, and 70 are used in high-pressure applications and pipelines requiring superior yield strength. These grades are supplied in both buttweld and forged formats. Buttweld fittings are manufactured as per MSS SP-75, while forged fittings such as socket weld and threaded types comply with ASME B16.11 and BS 3799 standards. The fittings include elbows, tees, couplings, unions, plugs, and swages, available in pressure classes 2000#, 3000#, 6000#, and 9000#.
Carbon Steel Flanges are manufactured using grades like ASTM A105 for ambient temperature applications and ASTM A350 LF2 for low-temperature services. These flanges comply with ASME/ANSI B16.5, B16.47, and EN 1092-1 and are available in types such as Weld Neck (WNRF), Slip-On (SORF), Blind (BLRF), Socket Weld, Threaded, and Lap Joint Flanges. Flanges are offered in class ratings from 150# up to 2500# and are available with Raised Face (RF), Flat Face (FF), or Ring Type Joint (RTJ) sealing faces.
ASTM A694 F42, F46, F52, F60, F65, and F70 are high-yield carbon steel grades designed for high-pressure pipeline flanges and components. These grades are often used for the fabrication of forged flanges and outlet fittings (Olets) such as Weldolets, Sockolets, Threadolets, and Nipolets, manufactured to MSS SP-97 standards. These outlet fittings support strong and leak-proof branch connections in piping systems ranging from ½” to 36” NB. Our carbon steel fittings and flanges are tested per EN 10204 3.1/3.2 with full traceability and comply with international specifications including NACE MR0175 and ISO 9001:2015.
ISO Certified Supplier of Carbon Steel Fittings & Flanges – ASME B16.11 – Socket Weld & Threaded Elbows, Tees, Caps, Unions, Couplings – ANSI B16.5 Flanges: WNRF, SORF, Blind, Threaded, SWRF, RTJ – Full Range up to 48”, Buttweld Components: Buttweld Elbows, Tees, Reducers, Caps, Stub Ends – Compliant with ASME B16.9 & MSS SP-75 – Sizes from ½” to 48”, SCH 10 to XXS – ISO Approved.
Technical Index
Industrial Carbon Steel Specifications
| Material Grade | ASTM A234 WPB/WPC, ASTM A860 WPHY 42/46/52/60/65/70, ASTM A105, ASTM A350 LF2, ASTM A694 F42/F46/F52/F60/F65/F70 |
|---|---|
| Available Product Types | Buttweld Fittings (Elbows, Tees, Reducers, Caps, Stub Ends), Flanges (WNRF, SORF, BLRF, SWRF, RTJ, Threaded, Lap Joint), Forged Fittings (Socket Weld & Threaded), Olets (Weldolet, Sockolet, Threadolet, etc.) |
| Buttweld Size Range | ½” NB to 24” NB (Seamless), ½” NB to 48” NB (Welded) |
| Flanges Size Range | ½” NB to 24” NB |
| Forged Fittings Size | ½” NB to 4” NB (Socket Weld & Threaded) |
| Wall Thickness | SCH 10, SCH 20, SCH 40, SCH 80, SCH 120, SCH 160, XXS |
| Standard Specifications | ASTM A234 / ASME SA234, ASTM A105 / SA105, ASTM A860 / SA860, ASTM A350 / SA350, ASTM A694 / SA694, ANSI B36.10, B36.19 |
| Manufacturing Standards | ASME B16.9, ASME B16.5, ASME B16.11, MSS SP-75, MSS SP-97, EN 10253, DIN 2605/2615/2616, ISO 3419, JIS B2312 |
| Types | 90° Elbow (LR/SR), 45° Elbow, Equal Tee, Reducing Tee, Concentric Reducer, Eccentric Reducer, End Cap, Stub End, WNRF, SORF, Blind Flange, SWRF, RTJ, Socket Weld Elbow, Tee, Coupling, Union, Plug, Weldolet, Sockolet, Threadolet |
| Form | Seamless, Welded, Fabricated |
| Heat Treatment | Normalized, Tempered, Quenched & Tempered (as per grade) |
| Mechanical Properties | Tensile Strength: 415–690 MPa (varies by grade) Yield Strength: 205–485 MPa (varies by grade) Elongation: ≥20% |
| Pressure Ratings | Class 150 to 2500 / 3000# to 9000# for Forged Fittings / As per ASME B16.5, B16.11 & B16.9 |
| Testing & Certifications | EN 10204 3.1 & 3.2, NACE MR0175, IBR Approved, PMI, UT, Hydro Test, Radiography, MPT |
| Surface Finish | Black Coated, Anti-Rust Coated, Sand Blasted, Pickled |
| End Connection Types | Beveled Ends (BE), Plain Ends (PE), Socket Weld, Threaded (NPT/BSP), Flanged |
| Manufacturing Capabilities | Hot Forming, Cold Forming, Induction Heating, CNC Beveling, Custom Fabrication |
| Raw Material Sources | India, Japan, South Korea, USA, Germany, Italy |
| Export Destinations | USA, UAE, Saudi Arabia, Qatar, Oman, Kuwait, Egypt, South Africa, Nigeria, Indonesia, Malaysia, Singapore, Europe |
Industrial Carbon Steel Standards
| ANSI/ASME B16.47 Flanges | ANSI/ASME B16.36 Flanges | ANSI/ASME B16.5 Flanges | Pr. EN1902-1 Flanges |
| DIN Flanges | JIS Flanges | BS 4504 Flanges | BS 10 Flanges |
| MSS SP-44 Flanges | JIS B2220 Flanges | KS B1503 Flanges | UNI Flanges |
| SABS/SANS 1123 Flanges | AS 2129, AS 4087 Flanges | ISO 9624, ISO 7005-1 Flanges | AWWA Flanges Standard |
| GOST Standard Flanges | API Flanges | AS/ANZ 4331.1 Flanges | Series A Flange |
| Series B Flange | SAE J518 Flanges | GB Flange | Norwegian Standard Flanges |
| ASME B16.11 – Forged Steel Fittings, Socket-Welding and Threaded | BS 3799 – Screwed and Socket-Welding for the Petroleum Industry | MSS SP-79 – Socket-Welding Reducer Inserts | MSS SP-83 – Class 3000 Steel Pipe Unions, Socket-Welding and Threaded |
| MSS SP-95 – Swage(d) Nipples and Bull Plugs | MSS SP-97 – Integrally Reinforced Forged Branch Outlet Fittings | DIN 2986 – Threaded Fittings | DIN 2999 – Pipe Threads for Fittings (British Standard Pipe Threads) |
| ISO 49 – Malleable Iron Fittings, Threaded | ISO 7/1 – Pipe Threads Where Pressure-tight Joints Are Made on the Threads | EN 10241 – Steel Threaded Pipe Fittings | JIS B2316 – Japanese standard for forged pipe fittings. |
| ANSI/ASME B16.9 – Factory-Made Wrought Steel Buttwelding Fittings | ANSI/ASME B16.28 – Wrought Steel Short Radius Elbows and Returns | ANSI/ASME B16.25 – Buttwelding Ends(beval standards) | MSS SP-43 – Wrought and fabricated Butt welding Fittings for Light Wall Applications |
| MSS SP-75 – High Test Wrought Butt welding Fittings | DIN 2616 – Butt welding Pipe Fittings: Reducers | DIN 2617 – Butt welding Pipe Fittings: Caps | DIN28011 – Dished Ends(used in pressure vessels) |
| EN10253-1 Butt-welding Pipe Fittings(Non Alloy Steels) | EN10253-2 Butt-welding Pipe Fittings(Stainless/Alloy Steels) |
Carbon Steel International Standards
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| ASTM A234 WPB | 1.0457 | K03006 | STPG 370 | 3601 430 | 20 | E24-2 | P235TR2 / P265GH |
| ASTM A234 WPC | 1.0501 | K03504 | STPG 410 | 3601 430 | 20 | E28-2 | P265GH / P280GH |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| WPHY 42 | – | K31242 | – | 4360 43A | 10G2 | E24-2 | S275JR |
| WPHY 46 | – | K12446 | – | 4360 43C | 10G2S | E28-2 | S275J2G3 |
| WPHY 52 | – | K12822 | – | 4360 50C | 10G2F | E36-2 | S355J2G3 |
| WPHY 60 | – | K03014 | – | 4360 55C | 15GS | E42-2 | P355N |
| WPHY 65 | – | K03015 | – | 4360 60C | 16GS | E460 | P460N |
| WPHY 70 | – | K03016 | – | 4360 65C | 17G1S | E52-3 | P460NL1 |
Carbon Steel Chemical Composition
| Grade | C (%) | Mn (%) | Si (%) | P (%) | S (%) | Cr (%) | Mo (%) | Ni (%) | V / Others |
|---|---|---|---|---|---|---|---|---|---|
| ASTM A234 WPB | 0.30 max | 0.50–1.20 | 0.10 min | 0.035 max | 0.040 max | 0.40 max | 0.15 max | 0.40 max | – |
| ASTM A234 WPC | 0.35 max | 0.50–1.35 | 0.10 min | 0.035 max | 0.040 max | 0.40 max | 0.15 max | 0.40 max | – |
| ASTM A860 WPHY 42–70 | 0.26 max | 1.15 max | 0.50 max | 0.030 max | 0.030 max | 0.50 max | 0.50 max | 0.50 max | V: 0.06 max |
| ASTM A105 | 0.35 max | 0.60–1.05 | 0.10–0.35 | 0.035 max | 0.040 max | 0.30 max | 0.12 max | 0.40 max | – |
| ASTM A350 LF2 | 0.30 max | 0.60–1.35 | 0.15–0.30 | 0.035 max | 0.040 max | 0.30 max | 0.12 max | 0.40 max | – |
| ASTM A694 F42–F70 | 0.26 max | 1.00–1.35 | 0.15–0.35 | 0.025 max | 0.025 max | 0.30 max | 0.12 max | 0.50 max | – |
Carbon Steel Flanges Mechanical Properties
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HBW) | Impact Test (Charpy V-notch) |
|---|---|---|---|---|---|
| ASTM A234 WPB | 415–585 | ≥240 | ≥22 | ≤197 | Not required |
| ASTM A234 WPC | 485–655 | ≥275 | ≥22 | ≤197 | Not required |
| ASTM A860 WPHY 42 | ≥455 | ≥290 | ≥20 | ≤235 | As per client requirement |
| ASTM A860 WPHY 46 | ≥485 | ≥315 | ≥20 | ≤235 | As per client requirement |
| ASTM A860 WPHY 52 | ≥565 | ≥360 | ≥20 | ≤235 | As per client requirement |
| ASTM A860 WPHY 60 | ≥655 | ≥415 | ≥20 | ≤235 | As per client requirement |
| ASTM A860 WPHY 65 | ≥690 | ≥450 | ≥20 | ≤235 | As per client requirement |
| ASTM A860 WPHY 70 | ≥760 | ≥485 | ≥20 | ≤235 | As per client requirement |
| ASTM A105 | 485–655 | ≥250 | ≥22 | ≤187 | Not required |
| ASTM A350 LF2 | 485–655 | ≥250 | ≥22 | ≤197 | Min. 20 ft-lbf at -46°C |
| ASTM A694 F42 | ≥455 | ≥290 | ≥20 | ≤235 | As per service spec |
| ASTM A694 F46 | ≥485 | ≥315 | ≥20 | ≤235 | As per service spec |
| ASTM A694 F52 | ≥565 | ≥360 | ≥20 | ≤235 | As per service spec |
| ASTM A694 F60 | ≥655 | ≥415 | ≥20 | ≤235 | As per service spec |
| ASTM A694 F65 | ≥690 | ≥450 | ≥20 | ≤235 | As per service spec |
| ASTM A694 F70 | ≥760 | ≥485 | ≥20 | ≤235 | As per service spec |
Carbon Steel Types
Carbon Steel Industries & Applications
ASTM A105 Carbon Steel Flange Weight Chart
| Size | OD | WT | SR 90 Deg Elbows Centre – Face A | Weight | LR 90 Deg Elbows Centre – Face A | Weight | SR 45 Deg Elbows Centre – Face B | Weight | ||
|---|---|---|---|---|---|---|---|---|---|---|
| mm | inch. | mm | mm | SCH | mm | kg | mm | kg | mm | kg |
| 500 | 20″ | 508 | 9.52 | STD | 508 | 93.5 | 762 | 140 | 318 | 85 |
| 12.7 | X.S | 508 | 124 | 762 | 186 | 318 | 112.5 | |||
| 450 | 18″ | 457 | 9.52 | STD | 457 | 75.6 | 686 | 113 | 286 | 56.5 |
| 12.7 | X.S | 457 | 100 | 686 | 150 | 286 | 75 | |||
| 400 | 16″ | 406.4 | 9.52 | STD | 406 | 59.5 | 610 | 89.3 | 254 | 45 |
| 12.7 | X.S | 406 | 78.7 | 610 | 118 | 254 | 59 | |||
| 350 | 14″ | 355.6 | 9.52 | STD | 356 | 45.4 | 533 | 68.1 | 222 | 34.1 |
| 12.7 | X.S | 356 | 60 | 533 | 90 | 222 | 45 | |||
| 300 | 12″ | 323.9 | 9.52 | STD | 305 | 35.4 | 457 | 53.1 | 190 | 26.6 |
| 12.7 | X.S | 305 | 46.7 | 457 | 70 | 190 | 35 | |||
| 250 | 10″ | 273.9 | 9.27 | STD | 254 | 24.1 | 381 | 36.1 | 159 | 18.1 |
| 12.7 | X.S | 254 | 32.5 | 381 | 48.8 | 159 | 24.4 | |||
| 200 | 8″ | 219.1 | 8.18 | STD | 203 | 13.6 | 305 | 20.4 | 127 | 10.2 |
| 12.7 | X.S | 203 | 20.9 | 305 | 30.9 | 127 | 15.5 | |||
| 150 | 6″ | 168.3 | 7.11 | STD | 152.4 | 6.8 | 229 | 10.1 | 95.2 | 5.1 |
| 10.97 | X.S | 152.4 | 10.2 | 229 | 15.3 | 95.2 | 7.7 | |||
| 125 | 5″ | 141.3 | 6.65 | STD | 127 | 4.8 | 190 | 6.8 | 79.4 | 3.4 |
| 9.5 | X.S | 127 | 6.5 | 190 | 10 | 79.4 | 5 | |||
| 100 | 4″ | 114.3 | 62 | STD | 101.6 | 2.8 | 152.4 | 4.2 | 63.5 | 2.1 |
| 8.56 | X.S | 101.6 | 3.9 | 152.4 | 5.7 | 63.5 | 2.9 | |||
| 80 | 3″ | 88.9 | 5.49 | STD | 76.2 | 1.45 | 114.3 | 2.18 | 50.8 | 1.1 |
| 7.62 | X.S | 76.2 | 1.95 | 114.3 | 2.86 | 50.8 | 1.45 | |||
| 65 | 21/2″ | 73 | 5.16 | STD | 63.5 | 0.95 | 95.2 | 1.46 | 44.4 | 0.73 |
| 71 | X.S | 63.5 | 1.27 | 95.2 | 1.82 | 44.4 | 0.91 | |||
| 50 | 2″ | 60.3 | 3.91 | STD | 50.8 | 0.5 | 76.2 | 0.72 | 34.9 | 0.36 |
| 5.54 | X.S | 50.8 | 0.68 | 76.2 | 1 | 34.9 | 0.5 | |||
| 40 | 11/2″ | 48.3 | 3.68 | STD | 38.1 | 0.26 | 57.1 | 0.4 | 28.6 | 0.2 |
| 58 | X.S | 38.1 | 0.35 | 57.1 | 0.5 | 28.6 | 0.25 | |||
| 32 | 11/4″ | 42.2 | 3.56 | STD | 31.75 | 0.18 | 47.6 | 0.28 | 25.4 | 0.14 |
| 4.85 | X.S | 31.75 | 0.24 | 47.6 | 0.39 | 25.4 | 0.2 | |||
| 25 | 1″ | 33.4 | 3.38 | STD | 25.4 | 0.11 | 38.1 | 0.15 | 22.2 | 09 |
| 4.55 | X.S | 25.4 | 0.14 | 38.1 | 0.19 | 22.2 | 0.11 | |||
| 20 | 3/4″ | 26.7 | 2.87 | STD | – | – | 28.6 | 08 | 11.1 | 04 |
| 3.91 | X.S | – | – | 28.6 | 0.11 | 11.1 | 05 | |||
| 15 | 1/2″ | 21.3 | 2.78 | STD | – | – | 38.1 | 08 | 15.9 | 04 |
| 3.73 | X.S | – | – | 38.1 | 0.10 | 15.9 | 05 | |||
ASTM A234 Carbon Steel Buttweld Fittings Dimensions
| NOMINAL PIPE SIZE | ALL FITTINGS | ALL FITTINGS | ALL FITTINGS | ELBOWS AND TEES | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | 180 DEG RETURN BENDS | REDUCERS | CAPS |
|---|---|---|---|---|---|---|---|---|---|
| NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
| ½ to 2½ | 0.06 -0.03 |
0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 5 to 8 | 0.09 -0.06 |
0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
| 10 to 18 | 0.16 -0.12 |
0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 20 to 24 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 26 to 30 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
| 32 to 48 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
ASTM A105 Carbon Steel Forged Fittings Dimensions
| Size | OD | WT | SR 90 Deg Elbows Centre – Face A | Weight | LR 90 Deg Elbows Centre – Face A | Weight | SR 45 Deg Elbows Centre – Face B | Weight | ||
|---|---|---|---|---|---|---|---|---|---|---|
| mm | inch. | mm | mm | SCH | mm | kg | mm | kg | mm | kg |
| 500 | 20″ | 508 | 9.52 | STD | 508 | 93.5 | 762 | 140 | 318 | 85 |
| 12.7 | X.S | 508 | 124 | 762 | 186 | 318 | 112.5 | |||
| 450 | 18″ | 457 | 9.52 | STD | 457 | 75.6 | 686 | 113 | 286 | 56.5 |
| 12.7 | X.S | 457 | 100 | 686 | 150 | 286 | 75 | |||
| 400 | 16″ | 406.4 | 9.52 | STD | 406 | 59.5 | 610 | 89.3 | 254 | 45 |
| 12.7 | X.S | 406 | 78.7 | 610 | 118 | 254 | 59 | |||
| 350 | 14″ | 355.6 | 9.52 | STD | 356 | 45.4 | 533 | 68.1 | 222 | 34.1 |
| 12.7 | X.S | 356 | 60 | 533 | 90 | 222 | 45 | |||
| 300 | 12″ | 323.9 | 9.52 | STD | 305 | 35.4 | 457 | 53.1 | 190 | 26.6 |
| 12.7 | X.S | 305 | 46.7 | 457 | 70 | 190 | 35 | |||
| 250 | 10″ | 273.9 | 9.27 | STD | 254 | 24.1 | 381 | 36.1 | 159 | 18.1 |
| 12.7 | X.S | 254 | 32.5 | 381 | 48.8 | 159 | 24.4 | |||
| 200 | 8″ | 219.1 | 8.18 | STD | 203 | 13.6 | 305 | 20.4 | 127 | 10.2 |
| 12.7 | X.S | 203 | 20.9 | 305 | 30.9 | 127 | 15.5 | |||
| 150 | 6″ | 168.3 | 7.11 | STD | 152.4 | 6.8 | 229 | 10.1 | 95.2 | 5.1 |
| 10.97 | X.S | 152.4 | 10.2 | 229 | 15.3 | 95.2 | 7.7 | |||
| 125 | 5″ | 141.3 | 6.65 | STD | 127 | 4.8 | 190 | 6.8 | 79.4 | 3.4 |
| 9.5 | X.S | 127 | 6.5 | 190 | 10 | 79.4 | 5 | |||
| 100 | 4″ | 114.3 | 62 | STD | 101.6 | 2.8 | 152.4 | 4.2 | 63.5 | 2.1 |
| 8.56 | X.S | 101.6 | 3.9 | 152.4 | 5.7 | 63.5 | 2.9 | |||
| 80 | 3″ | 88.9 | 5.49 | STD | 76.2 | 1.45 | 114.3 | 2.18 | 50.8 | 1.1 |
| 7.62 | X.S | 76.2 | 1.95 | 114.3 | 2.86 | 50.8 | 1.45 | |||
| 65 | 21/2″ | 73 | 5.16 | STD | 63.5 | 0.95 | 95.2 | 1.46 | 44.4 | 0.73 |
| 71 | X.S | 63.5 | 1.27 | 95.2 | 1.82 | 44.4 | 0.91 | |||
| 50 | 2″ | 60.3 | 3.91 | STD | 50.8 | 0.5 | 76.2 | 0.72 | 34.9 | 0.36 |
| 5.54 | X.S | 50.8 | 0.68 | 76.2 | 1 | 34.9 | 0.5 | |||
| 40 | 11/2″ | 48.3 | 3.68 | STD | 38.1 | 0.26 | 57.1 | 0.4 | 28.6 | 0.2 |
| 58 | X.S | 38.1 | 0.35 | 57.1 | 0.5 | 28.6 | 0.25 | |||
| 32 | 11/4″ | 42.2 | 3.56 | STD | 31.75 | 0.18 | 47.6 | 0.28 | 25.4 | 0.14 |
| 4.85 | X.S | 31.75 | 0.24 | 47.6 | 0.39 | 25.4 | 0.2 | |||
| 25 | 1″ | 33.4 | 3.38 | STD | 25.4 | 0.11 | 38.1 | 0.15 | 22.2 | 09 |
| 4.55 | X.S | 25.4 | 0.14 | 38.1 | 0.19 | 22.2 | 0.11 | |||
| 20 | 3/4″ | 26.7 | 2.87 | STD | – | – | 28.6 | 08 | 11.1 | 04 |
| 3.91 | X.S | – | – | 28.6 | 0.11 | 11.1 | 05 | |||
| 15 | 1/2″ | 21.3 | 2.78 | STD | – | – | 38.1 | 08 | 15.9 | 04 |
| 3.73 | X.S | – | – | 38.1 | 0.10 | 15.9 | 05 | |||
Major Industrial Carbon Steel Fittings & Flanges Export Countries
United Arab Emirates (UAE), Jordan, Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, United States of America (USA), Singapore, Malaysia, Azerbaijan, Armenia, Georgia, Egypt, Algeria, Nigeria, South Africa, Kenya, Morocco, Ethiopia, Ghana, Tanzania, Sudan, Uganda, Angola.